OEM Antifreeze Coolant for Car Manufacturers and Industrial Equipment Suppliers

APPLICATION:

This antifreeze coolant is formulated for all liquid-cooled gasoline and diesel engines, including passenger cars, trucks, buses, agricultural machinery, and construction equipment. It is also well-suited for industrial cooling systems that demand reliable freeze and corrosion protection. Whether in tropical climates with high engine loads or in regions with severe winter conditions, this coolant provides year-round safety and stability.

DIRECTIONS FOR USE:

1. Before filling, drain the old coolant and flush the radiator to remove rust, scale, and residue.

2. Mix with deionized water according to the desired freezing protection level (commonly 1:1 ratio for -35°C).

3. Fill the cooling system slowly to prevent air pockets, then run the engine for a few minutes to ensure circulation.

4. Check the coolant level regularly and top up if necessary, ensuring the proper concentration is maintained.

WARNINGS:

• Do not mix with unknown or inferior coolants, as chemical incompatibility may reduce performance.

• Avoid using tap water, as minerals can cause scale buildup and damage the cooling system.

• Store in a cool, dry place away from direct sunlight and keep tightly sealed after use.

• Keep out of reach of children. In case of accidental contact with skin or eyes, rinse immediately with plenty of water.

• Recommended replacement cycle: every 24 months or 40,000 km, depending on driving conditions.